Firstly I would like to thank Keces and Arthur from their
USA distributor for arranging this sample for me to review.
*disclaimer: This sample was provided for the purpose of
writing a review, no incentive was given to write a favourable review. All
opinions expressed are my own subjective findings.
Gear Used: HP Laptop > Curious USB Cable > Keces S3
> German Maestro GMP400 / Ether Flow / Symphones V8 build
HP Laptop > JDS Labs OL DAC > S3 > German Maestro GMP400 / Ether Flow / Symphones V8 build
Tech Specs:
1. High Quality Toroidal Power Transformer.
2. High-performance DAC-ESS ES9026PRO.
3. USB DAC: PCM 32 bit/384kHz and DSD DSD64(DoP)/DSD128 (DoP) DSD64/DSD128/DSD256 (ASIO Native).
4. COAXIAL/OPTICAL DAC: PCM 24 bit/192kHz and DSD DSD64(DoP).
5. Placed Balanced/Unbalanced Headphone output: Max Output Power 2000mW + 2000mW@32ohms.
6. Placed RCA/XLR Input/Output interface: Could be a Preamplifier.
7. Volume Control System: 128 step attenuator. Accurate control volume to achieve left/right channel balanced.
8. Isolation circuit: Completely separates the grounding of the digital and analog sections.
9. Volume/Source/Sampling display using OLED has excellent visibility.
10. The 4mm thickness of the aluminum chassis to effective to blocks EMI/RFI interference.
11. The full-metal body realizes both vibration control and elegant style in an A4-size body that enables placement on a desktop to be a PC HIFI system or to be a small stereo system.
Headphone Output:
- XLR_4PIN: SNR: >-120db 20Hz-20kHz
A-Weighting.
- THD+N: <0.00115% at 1kHz A-Weighting at
300ohms 100mW.
- Frequency Response: 20Hz-20kHz
(+0dB/-0.09dB).
- Output Impedance: 0.6ohms.
- 2000mW at 32ohms at THD+N=0.1%.
- 1200mW at 300ohms at THD+N=0.1%.
- 650mW at 600ohms at THD+N=0.1%.
- 6.35mm: SNR: >-108db 20Hz-20kHz
A-Weighting.
- THD+N: <0.0015% at 1kHz A-Weighting at
300ohms 100mW.
- Frequency Response: 20Hz-20kHz
(+0dB/-0.09dB).
- Output Impedance: 0.6ohms.
- 1200mW at 32ohms at THD+N=0.1%.
- 350mW at 300ohms at THD+N=0.1%.
- 175mW at 600ohms at THD+N=0.1%.
MSRP: $1299.95 (Currently on Massdrop: https://www.massdrop.com/buy/keces-s-3-balanced-dac-amp)
Packaging, Build quality and Accessories:
The S3 came in a large brown box, with Keces embossed in
gold on the outside; this was the shipping and main box. Once you open the box
you will find the S3 held tightly in carboard inserts also wrapped in foam to
keep it safe. In a separate small box you will find the power cable and remote.
The box is nothing fancy, but it is sturdy and protects the unit perfectly
during shipping.
Accessory wise all you get is the power cable, USB cable and
a remote; to be honest nothing else is really needed for this device.
Build quality is superb, the full aluminium chassis is thick
and hefty keeping the unit cool in use too, the inputs and outputs all use high
quality sockets. The volume control feels very nice and the switches on the
front are all very secure. The remote is also aluminium and feels very well
made. No issues with the build quality, it feels like a premium product.
Features:
Firstly you have a 128 stepped volume control, you can hear
the click of the relays inside on every step, and it is easy to fine tune the
volume. I really like the stepped volume control, a feature of a lot of high
end products.
This amp is designed for full-size headphones, and is not a
good match for IEM’s, this does not bother me as most IEM’s do not require this
kind of amplification.
The S3 can be used as a pre-amp for power amplifiers (like
the Keces S125). There are balanced and single ended analogue outputs and inputs, along
with USB, Optical and Coaxial digital inputs. This makes the S3 a very
versatile device that will fit into any system.
The front screen shows you the input, sample rate, volume
and gain setting, a quick press on the volume knob changes input and there are
two switches on the front. One for high/low gain and another for
headphone/pre-amp mode.
Sound:
I have been using the S3 as my main DAC/Amp for a couple of
weeks now and will try and sum it up as best I can. First off the DAC is an ESS
Sabre DAC, which some people associate with slightly harsh highs; I can assure
you this is a well implemented ESS DAC Chip though. There is no Sabre glare
with the S3, but it is not lacking in extension or presence in any part of the
frequency range.
I have been using my German Maestro GMP400 out of the single
ended output, and the Ether Flow out of the balanced output. The GMP400 really
scale up with good amplification, the S3 brings out so much detail in
recordings but also the GMP400 likes the power and never sound thin or overly
bright with the S3 (which they can with lower powered amps). With both
headphones I never needed high gain, on the GMP400 I was at about 50-60 volume,
and with the Ether Flow around 10-20. The balanced output is quite powerful and
won’t have issues driving 99% of headphones out there.
The S3 has an effortless sound to it, never sounding
strained or lacking in dynamics, it can deliver thunderous bass with ease and
without sounding muddy. Transient response is excellent (headphone dependent
too). It has no issues driving the Ether Flow to ear damaging levels, and never
falters with them. The S3 delivers a full bodied and tonally balanced sound,
that is easy to listen to but at the same time there is so much detail. Micro
detail is all there, soundstage is not artificially boosted however it is very
well layered and separated.
Even when driving low impedance loads like my Symphones V8
build, there is a sense of ease to the sound, it flows without restraint or
added flavour. The sound is very linear but not boring and dry, never lacking
in impact. This is where my Objective 2 amp falls behind. It sounds a bit too
dry sometimes, lacking in dynamics that only higher end amps provide.
Using the S3 as a DAC + Pre-amp, you get a very detailed and
linear sound that has excellent resolution, micro detail and layering. The
quality of the DAC really is impressive, very open and airy but again
without harshness.
Using the S3 as an amp only again reveals what the amp
section can do on its own, feed it a good signal and it sings with its
effortless sound. I was worried the sound would be a little enthusiastic up top
due to the LM49720 op-amps I saw in the picture, but this amp shows that
implementation really is key to any component. There is no harshness but there
is excellent clarity and layering. Notes have a very natural tone to them with
excellent decay that just trails off into a black background.
Conclusion: The S3 is a do it all device like the Oppo HA-1,
but without Bluetooth and a fancy screen. The sound really is quite astonishing
when coming from something that is lower end or more coloured. It has the capability
to be neutral but not boring. In my personal opinion I find the Questyle
CMA400i to be more reference sounding than the S3, but then on the other hand
the S3 isn’t as smooth as the Sennheiser HDV820 which is a little too laid
back.
The S3 is engaging, effortless, dynamic and powerful. Yes
there are amps that can output more pure wattage at this price, but few offer
the flexibility of the S3, let alone have as good a DAC section.
The S3 is an easy recommendation if you are looking for an
all in one desktop solution. It really does nothing wrong, it sounds superb
whatever you use it for. The Keces S3 keeps me wanting to listen to more music,
and at the end of the day that’s what it is all about.
Sound Perfection Rating: 9.5/10 (I really struggle to find
any faults with this unit, I’ll take 0.5 away for not being suitable for IEM’s)
Did I miss the format compatibilities and price?
ReplyDeleteHi Micah, I'll update this :D initially I only put the headphone out specs and a link to the product page with the price.
Delete